Cart New Account Login

HomeAbout usProductsSupportForumsBlogCustomer Service

search inside this forum
Can I use script for flashing binary through PPCPROGNEXUS?
PARK K. May 31, 2017 at 04:57 AM (04:57 hours)
Staff: Takao Y.

  • I use PPCPROGNEXUS to flash binary into MPC5643L and MPC5744P.

    Now I manually runs
    CM ; load regular flash algorithm
    EM ; erase module
    SS ; load s19
    PM ; program module
    VM ; verify module
    Sequence to flash.

    Can I make a script for that sequence and use in PPCPROGNEXUS?
    I want to reduce the seqence to more easier.

    Always thank you.




    Comments

  • Greetings,

    Yes there is, and you already have the files to do it! Within your PROG PPCNEXUS software package look for CPROG. There is also a document about it to teach you how to create a CFG file of all the commands you wish to run and how you can run the script.


    Takao Yamada

  • Greetings,

    Any other questions or concerns?


    Takao Yamada

  • Dear. Takao Yamada.

    Thank you for your kindness.
    And sorry for making no response.

    I tried as you suggested and it works.
    That's exactly what I want. Thank you.

    And I have a additional questions.
    When I try this method, CPROPPCNEXUS window is dissapeared as soon as the process is ended. (Eventhough there are some errors during process.)

    I want to hold the window to see the detailed result about the process.

    Is there any options for that?



    Below is the Contents what I used for .bat file.

    START /W D:\PEMICRO\\cw_cprogppcnexus INTERFACE=USBMULTILINK PORT=USB1 BDM_SPEED 1 D:\PEMICRO\MPC5744P_Flash_Download.cfg FREQ 8000000



    and below is the contents of .cfg file what I used.

    RE              ;Reset the MCU
    CM D:\PEMICRO\Freescale_MPC5744P_1x32x616k_CFlash.PCP 0      ;Enable MPC555 Main Array at address 8000
    EM             ;Erase the module
    BM             ;Blank Check the module
    SS D:\PEMICRO\core.elf             ;Specify the S19 to use
    PM             ;Program the module with the S19
    VM             ;Verify the module again

  • Greetings,

    Please read the user manual for CPROG. You can learn about the '!' and '?' parameters you can use to prevent the window from closing.


    Takao Yamada

  • Dear. Takao.

    Oh. You mean everything is already in User Manual.
    It's my fault sorry.
    I'll take a look the Use Manual for CPROG with attention.
    Thank you very much!

Add comment


   Want to comment? Please login or create a new PEMicro account.







© 2017 P&E Microcomputer Systems Inc.
Website Terms of Use and Sales Agreement