Cart New Account Login

HomeAbout usProductsSupportForumsBlogCustomer Service

search inside this forum
PROGPPCNEXUS DEMO software create error meassage - out of range
Nai Pin K. Feb 11, 2015 at 09:37 PM (21:37 hours)
Staff: Takao Y.

  • I am using PROGPPCNECUS demo software to try out my programming on MPC5775K ..
    I do an "Upload Module", save the file as A.S19. Then I load this file into the "Specity Object File". When I do a "Verify Module" or "Program Module", there is this error message appear,

    Checking range of S records. Checked
    Verifying address $ Error- out of range
    Error while loading S record file.

    why there is this error? I am not able to do program or verify module.
    Hope to hear from you as soon as possible.




    Comments

  • Greetings,

    This is because you have the demo software. The demo is code-size limited to
    64K of data. Your file is over that limit so the software gave you the "out of
    range" error. If you purchase a full version of the software, then you will not get this error message. You could also be getting this error message if your S19/ELF file is outside of the algorithm's specified address range. Make sure you have the correct algorithm.


    Takao Yamada

Add comment


   Want to comment? Please login or create a new PEMicro account.







© 2017 P&E Microcomputer Systems Inc.
Website Terms of Use and Sales Agreement