Cart New Account Login

HomeAbout usProductsSupportForumsBlogCustomer Service

search inside this forum
Multilink Universal - FX Firmware upgrade failed
kunal g. Jan 27, 2015 at 04:45 PM (16:45 hours)
Staff: Takao Y.

  • Hello,

    I bought a new Multilink Universal - FX. i attached it to my computer and my computer recognized this new device.
    However when i connected to my custom board, it says that New firmware is available and tried to download itself, but unable to complete operation,

    It gives an Error : Flash Erase failed. Result = $7151

    Please help me in this case.

    Regards,
    Kunal Gaur




    Comments

  • Greetings,

    Did you read the quick start guide that came with the multilink? If you did, you would have installed the CD that came with the multilink and you will have the firmware updater utility to update the firmware.

    If you are missing this CD, please download it here:
    http://www.pemicro.com/downloads/download_file.cfm?download_id=346


    Takao Yamada

    • Hi,

      i have installed the software that came with the CD.
      and even the firmware updater is giving the same error.

      i was able to see Blue LED and Orange LED were ON.

      Thanks,
      Kunal Gaur

      • Greetings,

        What version of the firmware updater do you have? You should have version 5.17. And it should be updating the firmware to version 0933. If you do not have this, please download it again from the link I gave you earlier and see if you can get the latest version working.

        If you are still struggling, please create a support ticket with us and I will have our multilink experts to work with you.


        Takao Yamada

        • Hi,

          Thanks for the quick reply. i was able to update the firmware on hardware device.

          Regards,
          Kunal Gaur

Add comment


   Want to comment? Please login or create a new PEMicro account.







© 2017 P&E Microcomputer Systems Inc.
Website Terms of Use and Sales Agreement