PEmicro | Experts in Embedded tools for Flash Programming and Development

Wednesday, August 26, 2020

fail to use usb-ml-universal with sja1110
wu h. Aug 26, 2020 at 10:36 PM (22:36 hours)
Staff: Mika I.

4 comments

I'm developing with SJA1110 (NXP)。I have install the S32 Design Studio 3.2 
and some additional software offered by NXP engineer.I import a demo project 
and it built success.But it is fail to debug with a usb-ml-universal,a message 
box pop "Error:This hardware interface is an older model and does not support 
this device".
  
  Please kindly hellp me to fix it.

Comment #1 wu h. - August 26, 2020 - 10:36 PM (22:36 hours)

Comments

The multilink is label "Rev.C" on the shell, and recgonized "UMultilink Universal Rev A on USB1" in s32ds 3.2.
It works well with s32k144 in s32ds for arm 2018.r1

Comment #2 wu h. - August 26, 2020 - 11:05 PM (23:05 hours)

Hi,

Unfortunately, from the pictures that you sent in your Support Request, you appear to have a counterfeit Multilink. That would explain the error that you're seeing in S32 Design Studio.

If you would like to purchase a real Multilink to use in S32DS, you can do so from our site: http://www.pemicro.com/products/product_viewDetails.cfm?product_id=15320168&productTab=5

Best,
Mika

Comment #3 Mika I. (PEmicro Staff) - August 27, 2020 - 04:58 PM (16:58 hours)

Thanks for quick reply.In our county, it is not convenient to buy a multilink.I will refer to the goods supplier to find what happen.

Comment #4 wu h. - August 27, 2020 - 07:16 PM (19:16 hours)

Add comment

Want to comment? Please login or create a new PEmicro account.