Cart New Account Login

HomeAbout usProductsSupportForumsBlogCustomer Service

search inside this forum
search inside all forums
MPC5605B Cannot Enter background mode
Dustin M. Jun 11, 2020 at 03:07 PM (15:07 hours)
Staff: Takao Y.

  • Hello, 

    I am trying to figure out why I cannot enter BGDM.

    I receive this in the Status Window.

    Device IDCODE is $00000244
    Device ID Revision is $00000000

    Device IDCODE is $00000244
    Device ID Revision is $00000000

    Device IDCODE is $00000244
    Device ID Revision is $00000000

    Device IDCODE is $00000244
    Device ID Revision is $00000000

    Then it asks to choose the Algo for the chip. After this is what is
    shown in the Status window.

    Device IDCODE is $00000244
    Device ID Revision is $00000000

    Device IDCODE is $00000244
    Device ID Revision is $00000000

    Device IDCODE is $00000244
    Device ID Revision is $00000000

    Device IDCODE is $00000244
    Device ID Revision is $00000000
    Cannot enter background mode. Check connections.

    Any pointers are greatly appreciated.




    Comments

  • Greetings,

    Which algorithm are you selecting?

    When you open the software, try lowering the debug shift frequency and add 250 ms delay after reset. See if that improves your connection.

    If you continue to have issues, the next step is checking the RESET line with an oscilloscope. See if you get continuing patterns of reset. This indicates a watchdog and you need to figure out a way to disable the system bus chip or external watchdog on your board. A schematic will probably be required.


    Takao

  • Greetings,

    Do you have any other questions or concerns?


    Takao

  • Hi, 

    This is a secondary project, so I will try that and let you know.
    Thank you for the follow up.

    Hopefully this weekend I will have time to test and report back.

  • Greetings,

    Any more information on this?


    Takao

Add comment


   Want to comment? Please login or create a new PEmicro account.







© 2021 P&E Microcomputer Systems Inc.
Website Terms of Use and Sales Agreement