Cart New Account Login

HomeAbout usProductsSupportForumsBlogCustomer Service

search inside this forum
search inside all forums
"Error 45 During Scripts" on Windows XP
Joe D. Jan 6, 2020 at 12:06 PM (12:06 hours)
Staff: Takao Y.

  • I get the following error when trying to run the software for USB Multilink on Windows XP: "Could not contact BDM interface. Error 45 during scripts".

    The device has the latest firmware. The software version is 2.00.00.01.




    Comments

  • Greetings,

    What software specifically, and which hardware interface with its revision do you have? This will tell us more of what is the problem.

    Did this setup work in the past?


    Takao

    • The hardware is Revision D. The software is PROG12Z version 2.00.00.01, and the driver version is 9.0.0. This setup was working until recently, when an older Rev C unit stopped working and was replaced with the current one. 

      Thank you,
      --Joe

  • Greetings,

    Unfortunately you will need to upgrade your software. Based on the PROG12Z release notes:

    PROG12Z v6.94.00.00
    26 July 2018
    - Support for USB ML Universal Rev D
    - Support for USB ML Universal FX Rev C
    - Support for Intel HEX Extended Address Memory

    You will need at least version 6.94 from mid-year 2018 to support the rev D hardware.

    Our software upgrade policy is you get free software upgrades within a year of purchase, and 50% discount within 2 years of purchase. Your purchase is outside of this discount window:
    http://www.pemicro.com/products/product_viewDetails.cfm?product_id=49

    The benefit of getting the newer software is that it will work on newer machines like Win 10 64-bit, while your 2.00 version would have not worked in the latest operating systems.


    Takao

  • Hi, 

    The operating system we use for this setup is Windows XP Service Pack 3 v2002. Will there be any issue using the software on this version? Is there a demo version that we can use to test and make sure the software is compatible?

    Thank you,
    --Joe

  • Greetings,

    All of our software is backwards compatible down to Windows XP 32 bit. No, we cannot give you a demo software. If you run into issues our tech support team will be there to help you. If we cannot resolve the issue then we can return your money.


    Takao

  • Greetings,

    Do you have any questions or concerns?


    Takao

  • Hello, 

    I have purchased the software and managed to get it running on the computer which is in use. It is working with the Rev. D Multilink and there are no problems to report, so you may consider this issue closed.

    Thank you,
    --Joe

Add comment


   Want to comment? Please login or create a new PEmicro account.







© 2020 P&E Microcomputer Systems Inc.
Website Terms of Use and Sales Agreement