Cart New Account Login

HomeAbout usProductsSupportForumsBlogCustomer Service

search inside this forum
Multilink universal not working
akshar a. Aug 23, 2017 at 05:11 AM (05:11 hours)
Staff: Juan S.

  • I buy new multilink universal but its not work. my PE programmer work fine. please tell me how can i connect and programme MC56F8323 with multilink universal Using EOnCE




    Comments

  • Hi Akshar, 

    You may need to update the firmware on the multilink universal. Below is a link to the USB Multilink Universal Resource CD. It includes the firmware update utility as well as up-to-date firmwares.

    http://www.pemicro.com/downloads/download_file.cfm?download_id=346

    Regards,
    Juan See

    • We tried using this driver.Driver installed successfully ,after that we try to update firmware but ,IT SHOW THE ERROR BELOW,

      "Error Connecting to Hardware"

      usb connection indication show using BLUE LED.

  • Hi ashkar, 

    Is the yellow LED on? If not then the multilink universal is not detecting any voltage on your MC56F8323. How is power provided to the MC56F8323? Please make sure power is provided to the MC56F8323 and that VDD is connected.

    Regards,
    Juan See

Add comment


   Want to comment? Please login or create a new PEMicro account.







© 2017 P&E Microcomputer Systems Inc.
Website Terms of Use and Sales Agreement