Cart New Account Login

HomeAbout usProductsSupportForumsBlogCustomer Service

search inside this forum
search inside all forums
MultiLink Universal and 3V Target System
Paul M. Jul 27, 2017 at 03:22 PM (15:22 hours)
Staff: Takao Y.

  • Can the MultiLink Universal be used with a 3V Target System? Since VCC is supplied on pin 6 of the BDM connector (6-pin version for HCS08) the interface should be able to use this to adjust logic levels accordingly.


  • Greetings,

    Correct. As long as the VDD/VCC on the chip and what is on pin 6 of the BDM header matches, then all of the logic will work out. This is the reason why Pin 6 connection is mandatory so that the internal buffers in our hardware interfaces can determine the reference voltage. Otherwise it would have difficulty understanding whether 3V is high or floating (in a case where the target uses 5V).

    Takao Yamada

Add comment

   Want to comment? Please login or create a new PEMicro account.

© 2018 P&E Microcomputer Systems Inc.
Website Terms of Use and Sales Agreement