Cart New Account Login

HomeAbout usProductsSupportForumsBlogCustomer Service

search inside this forum
Program Trim fail
YT ZHANG . Apr 5, 2017 at 10:42 AM (10:42 hours)
Staff: Takao Y.

  • We use USB Multilink interface and PROGHCS08 Programmer-Version 1.40 to programming chip(MC9S08GT60ACFDE) In the production line.All programming steps is PASS Because we increase capacity needs to increase a programming workstation.We bought the USB Multilink Universal( USB Multilink interface has been discontinued)  We use USB Multilink Universal and PROGHCS08 Programmer-Version 1.40 to programming chip(MC9S08GT60ACFDE) failed at Program Trim.Interface prompt  FFBE Failure.How to solve this problem?thanks.




    Comments

  • Please try updating your firmware and see if that fixes your issue.
    http://www.pemicro.com/downloads/download_file.cfm?download_id=346

    • Has been updated firmware according to the following link.Can't solve program Trim failure the problem.We urgently need your technical support.thanks.

  • Can you provide a screenshot with all the programming steps leading up to the failure?

  • Greetings,

    Has this issue been resolved?


    Takao Yamada

Add comment


   Want to comment? Please login or create a new PEMicro account.







© 2017 P&E Microcomputer Systems Inc.
Website Terms of Use and Sales Agreement