Cart New Account Login

HomeAbout usProductsSupportForumsBlogCustomer Service

search inside this forum
ML Rev A. Does not communicate with Kinetic MKE02Z device
Naji N. Feb 26, 2017 at 10:55 AM (10:55 hours)
Staff: Kevin M.

  • Hi,

    I see the SWD_CLK and SWD_DIO pins toggling when I attempt to program the the device but it keeps saying that the device is secure. I do have a 10k pull-up resistor on the Reset_b pin and I see it toggling every 23us (must be internal Watchdog since device is blank). The device is fresh from the box.
    Vdd is 4.5V.

    I updated the drivers per "tom_thompson" solution but still no improvement.
    https://community.nxp.com/thread/300703

    Does the Rev A ML support the KE02Z?

    What do I need to be able to program the MKE02Z16VLC2 device?

    Thank you




    Comments

  • Naji,

    Are you using eclipse? or progacmp? Is this a multilink arm rev a or ml-12?

  • Hi,

    I am using CodeWarrior 10.7.
    I poked around and discovered that the processor was being starved for current. Once I let it draw more power, it responded to the Multilink.

    I am up and running now.

    Thank you.

Add comment


   Want to comment? Please login or create a new PEMicro account.







© 2017 P&E Microcomputer Systems Inc.
Website Terms of Use and Sales Agreement