Cart New Account Login

HomeAbout usProductsSupportForumsBlogCustomer Service

search inside this forum
Burned components
Massimiliano T. Oct 4, 2016 at 06:29 AM (06:29 hours)
Staff: Nick d.

  • My colleague used a "PEmicro Multilink Universal rev C" to program a board with MC56F84786VLK MICRO using a scripted code as explained in the CPROGDSC guide. The erase command seems to be successful but then, after the black check, we got error 0x25 (micro wasn't erase). After that we have 2 non working programmers: some component burned when programming uC already programmed.

    Could someone please tell us the part-number in order to replace:

    U11&U12, U21, T4&T3.

    Thank you very much




    Comments

    • U11 & U12 - Diodes Inc: 74LVC126AT14-13 (Make sure to only use the Diodes Inc brand for this replacement)

      U21 - TI: SN74LVC1G08DBVRE4

      T3 - Diodes: MMSZ5232B-7-F

      I don't believe there is a T4 designator in the Multilink Universal. Did you mean T2? If so T2 and T3 are the same part number.

Add comment


   Want to comment? Please login or create a new PEMicro account.







© 2017 P&E Microcomputer Systems Inc.
Website Terms of Use and Sales Agreement