Cart New Account Login

HomeAbout usProductsSupportForumsBlogCustomer Service

search inside this forum
QSPI flash programming with Multilink Universal FX for MPC5645s
Tian M. Jul 1, 2015 at 12:03 AM (00:03 hours)
Staff: Takao Y.

  • I used 'Firmware Updater Utility' to update FX firmware to MPC5xxx successfully. Only one Multilink was plugged into computer. 

    With the algorithms of Spansion_S25FL064P_2x32x2048k_QuadSPI_MPC5645S_parallel_Rev2.PCP and Multilink Universal FX, it could connect with MCU and asks for algorithms, while donwloading algorithms, it failed with hint, 'Error loading .PCP file: ... at address 00300001'.

    I changed to Multilink Universal with the same operation and success.

    Can you share your suggestion to overcome the issue?

    Thx
    Oliver




    Comments

  • Greetings,

    Have you tried lowering the debug shift speed when using the FX? It could be that the communication is too fast and you need to downshift to make it work. This option can be found in the connection manager of the PROG or ICD software.

    Try lowering the option down one by one until you tried all of the options.


    Takao Yamada

  • Greetings,

    Any update on this?


    Takao Yamada

    • Yamada-san
      After lower the operation frequency, it's ok on the programming.
      Thx
      Oliver

  • Hello, 
    Now customer would like to use Winbond QSPI flash. Whether 'Spansion_S25FL064P_2x32x2048k_QuadSPI_MPC5645S_parallel_Rev2.PCP' could also be used for Winbond QSPI flash's programming?
    If not, whether PEmicro will supply the algorithms for Winbond QSPI flash?

    Thanks
    Oliver

  • Greetings,

    We have different algorithms for Winbond QSPI. Please create a support request ticket on our support page and we can give you the algorithm. Within the ticket please specify which Winbond chip you are using.


    Takao Yamada

Add comment


   Want to comment? Please login or create a new PEMicro account.







© 2017 P&E Microcomputer Systems Inc.
Website Terms of Use and Sales Agreement