Cart New Account Login

HomeAbout usProductsSupportForumsBlogCustomer Service

search inside this forum
Kaarthi C. Nov 23, 2017 at 12:32 AM (00:32 hours)
Staff: Takao Y.

  • Sir,
    We are currently using MKV10Z32VLC7 controllers and we need a standalone programmer for production purpose.

    Now we have CYCLONE PRO and CYCLONE MAX, is this enough? otherwise, suggest a programmer.

    Thanks and regards


  • Greetings,

    The cyclone max can be used to program the Kinetis device you wish to program. The cyclone pro does NOT support the ARM Kinetis device.

    Takao Yamada

  • Greetings,
    1. Currently we have cyclone max but we can't able to work with kinetis MCUs. It says error 00007 we don't know where we have done wrong, so can you just send me simple program to work with that.

    2. Is there any possibility to exchange cyclone pro and cyclone max to get cyclone universal fx

  • Greetings,

    1) Instead of trying to debug the problem using standalone programming, first go to PROG for ARM (PROGACMP) software found in your cyclone max software package. Try using this software to figure out why you cannot connect.

    You should make sure to try both SWD communication protocol. JTAG will not work. Also, make sure you use the latest software and firmware for the cyclone max:


    Takao Yamada

  • Greetings,

    Any update on this?

    Takao Yamada

Add comment

   Want to comment? Please login or create a new PEMicro account.

© 2017 P&E Microcomputer Systems Inc.
Website Terms of Use and Sales Agreement