Cart New Account Login

HomeAbout usProductsSupportForumsBlogCustomer Service

search inside this forum
Flash algorithm support for NXP MPC5775K cut3
zhao x. Nov 22, 2017 at 01:00 AM (01:00 hours)
Staff: Takao Y.

  • Hi!
    I am using the NXP-MPC5775K chip which inside is cut3.2 version.However the latest Flash algorithm is Freescale_MPC5775K_xxxxx_cut2.PCP.There is somethings wrong when I press "Start" button.I wonder whether the Freescale_MPC5775K_xxxxx_cut2.PCP is perfectly suitable for NXP-MPC5775K cut3.2 version and whether you have developed the newest Flash algorithm for NXP-MPC5775K cut3.2 version ?




    Comments

  • Greetings,

    What is the error you reach when you use standalone programming?

    What happens if you use the PROG PPCNEXUS software found in the cyclone software package? Are you able to use the algorithm for cut2 and program? Where does it fail?


    Takao Yamada

  • Greetings,

    The other forum post I already answered your question. You are most likely reaching reset escalation. You can program the device a few times before it fails again, right?

    If you program using PROG are you able to program the cut3.2? Then you do not have any issues with our algorithms.


    Takao Yamada

  • Greetings,

    Any update on this?


    Takao Yamada

Add comment


   Want to comment? Please login or create a new PEMicro account.







© 2017 P&E Microcomputer Systems Inc.
Website Terms of Use and Sales Agreement