Cart New Account Login

HomeAbout usProductsSupportForumsBlogCustomer Service

search inside this forum
Multi-link universal Programmer not working while programming
kaustubh k. Aug 22, 2017 at 01:56 AM (01:56 hours)
Staff: Takao Y.

  • Hello,
    I have Multi-link universal programmer(Normal blue color).
    When i connect to PC and working with kinetics code**rrier environment and try to flash in my hardware it did not communicating with my hardware.
    Previously it works fine but since last week it did not work.

    It shows error of

    "P&E connection Assistance"
    "An error occurred while connecting to interface hardware or taget specified in the Launch Configuration Dialog"

    "Refresh"
    "Retry" "Abort"

    Please guide !!




    Comments

  • Greetings,

    1) Is the blue and yellow LED lit before you start a debug session?

    2) Did you check whether you are using SWD or JTAG protocol? Find within your debug configurations.

    3) Have you installed any new software from PEmicro or NXP recently that may have caused issues? Has your multilink been used in other projects recently?

    4) Have you tried connecting to other chips and boards using this multilink? Does it work?


    Takao Yamada

  • Greetings,

    Any update on this?


    Takao Yamada

Add comment


   Want to comment? Please login or create a new PEMicro account.







© 2017 P&E Microcomputer Systems Inc.
Website Terms of Use and Sales Agreement