Cart New Account Login

HomeAbout usProductsSupportForumsBlogCustomer Service

search inside this forum
SAMD21G18 once flashed, cannot program it again
Jonathan M. Jun 28, 2017 at 01:52 PM (13:52 hours)
Staff: Juan S.

  • Hi community!

    We're at production phase, so we're programming devices with Cyclone FX.

    Scenario:

    Target: SAMD21G18
    Device: Cyclone FX

    Issue: Once flashed, cannot flash it again. I have to use atprogram.exe from Atmel (now Microchip)in order to perform a full chiperase, in order to be able to program it with the Cyclone FX again.

    Observations: This worked before, I was able to program it several timesin a row (with the proper care of course).

    Already troubleshot with the info at this topic:

    http://www.pemicro.com/forums/forum.cfm?forum_topic_id=5667&forum_id=7#c14505

    Does anyone have an idea of this?

    Thanks a lot!

    Yours sincerely:

    Jon M.




    Comments

Add comment


   Want to comment? Please login or create a new PEMicro account.







© 2017 P&E Microcomputer Systems Inc.
Website Terms of Use and Sales Agreement