Cart New Account Login

HomeAbout usProductsSupportForumsBlogCustomer Service

search inside this forum
Cyclone Error $B009 - Modifying Next Serial
Steven P. Dec 6, 2016 at 01:54 PM (13:54 hours)
Staff: Takao Y.

  • I have check both the SAP_LAUNCH.doc file and the following link:

    http://www.pemicro.com/faqs/faq_view.cfm?id=201

    And neither explain what the error code $B009 mean. A search for "Error $B009" returns no results as well.

    I attempt to modify the next serial number by selecting the SAP ID and the ALG ID under the Modify Serial Number section of the Cyclone Universal. When I click any of the +1/+10/-1/-10 buttons the Error light comes on and back at the home screen is states Error $B009. Also, the next serial number is not modified.

    Can someone please explain why I am unable to modify the next serial number and/or what the error $B009 means?




    Comments

  • Greetings,

    Error $B009 is relatively new. It means error getting serial file from storage. Are you using an SD card? Are you using newer firmware with old software, or vice versa?

    Try installing the latest firmware/software we have on our website and see if it resolves the issue:
    http://www.pemicro.com/downloads/download_file.cfm?download_id=462


    Takao Yamada

    • Hello,

      I installed the latest software, which in turn updated my Cyclone's firmware. The issue has been resolved. The SAP image had been stored internal to the Cyclone, if that is relevant for anyone else. Thank you.

Add comment


   Want to comment? Please login or create a new PEMicro account.







© 2017 P&E Microcomputer Systems Inc.
Website Terms of Use and Sales Agreement