Cart New Account Login

HomeAbout usProductsSupportForumsBlogCustomer Service

search inside this forum
Create SAP Image with Command Lines
Jerome V. Nov 21, 2016 at 04:03 AM (04:03 hours)
Staff: Takao Y.

  • Hello All,

    I would like to create a python script in order to create a SAP file with a *.cfg file.
    I have seen that some executables are available but the documentation is not present in the folder.
    Can you send me an example for the Qorivva MPC5XXX please ?
    Thanks in advance,




    Comments

  • Greetings,

    I sent you a zip file with 2 documents. Use the max configuration to do the Qorivva setup.


    Takao Yamada

    • Hello Takao,

      Thanks a lot for your documentation.
      In your documentation, I dont see the executable to use for the Quorivva MPC5748G ?
      Is it the csapppcnexusz.exe ?
      Thanks a lot,

      Jerome

  • Greetings,

    You are correct, that is the one you need to use. The naming may have changed since the document was last updated.


    Takao Yamada

    • Ok thanks for the clarification.

      I see that it is possible to load the SAP File.
      With the csapppcnexusz.exe, I just want to generate a SAP File.
      I need the PCP file, s19 file and the path for the SAP correct ?

      This setup is correct for the cyclone universal ?
      Thanks a lot

  • Greetings,

    If you do not specify a cyclone to load the SAP image, then you will be just generating a SAP image.

    Yes, it will work on cyclone universal.


    Takao Yamada

    • Thanks a lot.
      I have written the command line :
      csapppcnexusz ? ! filename ' + CFG_PATH + ' imagefile ' + SAP_PATH

      And during the execution of this command, I have the following error :

      Access violation at address ... in module csapppcnexusz. read of address ...

      Is it a command line problem ?

      Thanks a lot

  • Hi Takao,

    Now I'm able to generate a SAP Image.
    But I have an error when I launch the csapppcnexusz executable.

    I have the Error :
    Access violation at address 0057858F in module 'csapppcnexusz.exe'. Read of address 000002FC.

    Thanks in advance for your help.

  • Greetings,

    Could you detail the full extent of what the value of "filename" and "CFG_PATH" and all other parameters you are using?

    If you do not use variables and instead detailed the full paths of the CFG file and SAP path, does everything work?


    Takao Yamada

  • By the way, I have removed your other forum thread as that is just a repeat of this request. You are just doubling my efforts.


    Takao Yamada

  • Thanks for your answer.
    Sorry for the other thread.
    I have found the root cause I think, First time, I have copied only the executable file.
    Now I have imported the complete sources and I dont see the error.
    Executable file has some dependences ?
    Thanks a lot

  • Greetings,

    Yes, there are other files like the .def files and pathing dependencies that are necessary. You should not move the EXE files.


    Takao Yamada

  • Ok. Thank you for your help.
    Regards,

    Jerome

Add comment


   Want to comment? Please login or create a new PEMicro account.







© 2017 P&E Microcomputer Systems Inc.
Website Terms of Use and Sales Agreement