Cart New Account Login

HomeAbout usProductsSupportForumsBlogCustomer Service

search inside this forum
ST32 SPC560B60L7B6E0 configuration list for generating SAP file
huang b. Mar 8, 2016 at 11:04 PM (23:04 hours)
Staff: Takao Y.

  • for ST32 SPC560B60L7B6E0
    "CM D:\PEMicro\cyclone_stmicro\Algorithms\SPC56\ST_SPC56xP60_1x32x16k_DFlash.PCP
    EM ;Erase Module
    CM D:\PEMicro\cyclone_stmicro\Algorithms\SPC56\ST_SPC560B60_1x32x256k_CFlash.PCP
    SS E:\项目\上实测试台\BCM AS22\烧写台改造\AS22-HighLine-Flash_V866_20160105.mot
    EM ;Erase Module
    PM ;Program Module
    VM ;Verify Module
    RE ;Reset chip
    GO ;Start Code Running"
    is the configuring list correct?




    Comments

  • Greetings,

    There is no correct or incorrect configuration. It is up to you on the order of commands you wish to execute. From what I see, you are erasing the DFLASH and CFLASH, and then programming just the CFLASH. If you plan on programming the DFLASH, you will need to call program module before you switch the algorithm to the CFLASH.


    Takao Yamada

Add comment


   Want to comment? Please login or create a new PEMicro account.







© 2017 P&E Microcomputer Systems Inc.
Website Terms of Use and Sales Agreement