Cart New Account Login

HomeAbout usProductsSupportForumsBlogCustomer Service

search inside this forum
How to use cycloneMAX to program KE06?
huaping t. Dec 15, 2015 at 09:58 AM (09:58 hours)
Staff: Kevin M.

  • we want to use cycloneMAX to program KE06, why must we connect PIN7 of IDC20 and pin13 of IDC20, then we can program it sucessfully? we don't want to use IDC20 adapter, can we use standard 20-pin port connect directly without IDC20?
    Thanks a lot!




    Comments

  • Huaping,

    Are you using SWD or JTAG?

    Best,

    Kevin

  • hi kevin:
    Use SWD.
    Thanks!

  • hi kevin:
    Use SWD.
    Thanks!

  • Huaping,

    The cyclone max requires an adapter for SWD. https://www.pemicro.com/products/product_viewDetails.cfm?product_id=15320149

    Best,

    Kevin

  • Hi Kevin:
    Is this necessary for this adapter? Because I can't find this adatper, CycloneMAX is available? Can I use PORTE to connect MCU by SWD directly?
    If direct connect, CycloneMAX show error #00007.
    Pls help it!
    Thanks!

    Huaping

  • The only prescribed method for using SWD with the cyclone max is the jtag/swd adapter.

    Best,

    Kevin

Add comment


   Want to comment? Please login or create a new PEMicro account.







© 2017 P&E Microcomputer Systems Inc.
Website Terms of Use and Sales Agreement