Cart New Account Login

HomeAbout usProductsSupportForumsBlogCustomer Service

search inside this forum
Command line configuration for programming SPC56EL60
Matt M. Oct 6, 2015 at 05:14 PM (17:14 hours)
Staff: Takao Y.

  • Using Cprogppcnexus appears to timeout without connecting to CycloneMAX below is my batch File can someong tell me if I have something setup wrong?

    rem echo off
    rem ST9HEXCREATOR < PCD.txt
    rem hex2srec.exe -Iihex -Osrec PCD.hex PCD.s19

    cprogppcnexus PCD.cfg INTERFACE=CYCLONEMAX PORT=USB1
    if errorlevel 1 goto fail
    :PASS
    echo PASS! > PCD_LOG.txt
    echo PASS!
    goto done
    :FAIL
    echo FAIL! > PCD_LOG.txt
    echo FAIL!
    goto done
    :done
    pause




    Comments

  • Greetings,

    Instead of trying to solve the problem in CPROG, try using the regular PROG software found in the same directory and let us know if you are able to flash program using the UI version of the flash programming software.

    Things to look into is the CFG file may have problems and you may want to try lowering the debug shift frequency [bdm_speed n] where n is the value that matches the speed you selected in PROG software. bdm_speed of 5 is usually safe and pretty fast.


    Takao Yamada

  • Greetings,

    Any update on this?


    Takao Yamada

Add comment


   Want to comment? Please login or create a new PEMicro account.







© 2017 P&E Microcomputer Systems Inc.
Website Terms of Use and Sales Agreement