Cart New Account Login

HomeAbout usProductsSupportForumsBlogCustomer Service

search inside this forum
Error code 6 starting address is not in module
John P. Jul 10, 2015 at 11:12 PM (23:12 hours)
Staff: Takao Y.

  • 9S08QG4 absolute assembly project.

    917 bytes of code, 24 data bytes.

    I entered:

    starting address = 0000
    ending address = FFFF

    Error code 6 starting address is not in module

    Thanks for your help.




    Comments

  • Oops, ROM start is $F000.

    Ok, no error code 6.

    I programmed a device, it worked.

    Then, as a test, I disconnected and went back to the MultiLink and used it to erase the device.

    Then, I reconnected the target to the Cyclone. Now the Cyclone gives error 7.

    The target is in a test fixture with battery power, a switch to connect power to the BDM connector, and a switch to ground the Reset pin of the BDM connector.

  • I forgot to enable power from the Cyclone to the target.  :)

    Now to play with the serial number generator.

  • Greetings

    Did you solve all your problems? Let me know if you have any more questions.


    Takao Yamada

Add comment


   Want to comment? Please login or create a new PEMicro account.







© 2017 P&E Microcomputer Systems Inc.
Website Terms of Use and Sales Agreement