Cart New Account Login

HomeAbout usProductsSupportForumsBlogCustomer Service

search inside this forum
Cyclone Max: Can we trim Kinetis series MCU with Cyclone Max.
Manjit S. Jul 1, 2015 at 05:48 AM (05:48 hours)
Staff: Takao Y.

  • Is there any option to trim the Internal Clock Reference of ICS module of Kinetis KE0x series MCU's using Cyclone Max?

    Thanks & Regards
    Manjit Singh




    Comments

  • Greetings,

    "PT: Program Trim" command is available. This will program the default clock frequency trim value. If you want a specific frequency, then check the "Use custom trim reference frequency" and change the frequency.


    Takao Yamada

  • Thanks Takao for this information.

    Can you please let me know where to insert TM command in programming sequence? Means before programming (PM) or after PM.

    • Greetings,

      Usually after PM, but it should not matter if done before PM.
      If you get an error using PT command, then it means your S19/ELF binary file has something programmed at the trim register location within flash. Please read your chip's reference manual to find out where this register is located.


      Takao Yamada

Add comment


   Want to comment? Please login or create a new PEMicro account.







© 2017 P&E Microcomputer Systems Inc.
Website Terms of Use and Sales Agreement