Cart New Account Login

HomeAbout usProductsSupportForumsBlogCustomer Service

search inside this forum
Using PROPPPCNEXUS for programming fails due to no possibilty to choose base address?
Mikael K. Jun 24, 2015 at 08:58 AM (08:58 hours)
Staff: Takao Y.

  • Reading the Flash Programming Procedure via help page for PROGPPCNEXUS.

    Step 2) "After you select the .PCP file, you will be asked for the base address. This is the address at which you would like to program the code. Enter the appropriate base address."

    This will not appear for me, what could be wrong?

    I assume my programming error could depend on this, not choosing a base address? It is set to 0x000000 default.


    my .pcp file is Freescale_MPC5634M_1x32x384k_LCFlash.PCP.

    My .s19 file is starting like this:
    S00600004844521B
    S31900080000005A00000008200000000000000000009421FF8028
    S319000800149001000C7C0000A6640002007C00012410011339A7
    S319000800281061132110811B2110A1232110C12B2110E13321ED
    S3190008003C11013B211121432111414B211161532111815B21EC
    S319000800507C000026900100787C0802A6900100747C0902A685
    S31900080064900100707C0102A69001006C7C1A02A69001006820
    S319000800787C1B02A6900100647C0082A690010060480047C14D
    S3190008008C800100607C0083A6800100647C1B03A680010068BE
    S319000800A07C1A03A68001006C7C0103A6800100707C0903A6CD
    S319000800B4800100747C0803A6800100787C0FF12011815B0185
    S319000800C81161530111414B011121430111013B0110E13301C9
    .
    .
    .

    My error when trying to flash is:

    Checking range of S records. Checked.
    Programming Address $ Error - out of memory
    . Error during programming


    I might add also that I am using an trial (demo) license. Could this relate to my problems?




    Comments

  • Greetings,

    The trial will be the only reason the "Error - out of memory" would show up. So the problem you are facing is due to the limited 64K size. You will need to purchase a full-version of the software to have no size limitations:

    http://www.pemicro.com/products/product_viewDetails.cfm?product_id=15320089

    The prompt for base address is mostly for external flash or devices that have internal flash that can be mapped to any location. For PowerPC Nexus, that is not the case.


    Takao Yamada

    • OK!

      My order is sent, thx!

      /Mikael

Add comment


   Want to comment? Please login or create a new PEMicro account.







© 2017 P&E Microcomputer Systems Inc.
Website Terms of Use and Sales Agreement