Cart New Account Login

HomeAbout usProductsSupportForumsBlogCustomer Service

search inside this forum
Cyclone Max Control Functionality
Dan B. May 14, 2015 at 04:28 PM (16:28 hours)
Staff: Kevin M.

  • I am considering the Cyclone Max for a field programming application. The target has two MPC5634 processors. To implement this solution,  I need to use some additional control logic to select the MPC5634s individually, and then read back some discrete outputs from the target. Is there any method of setting or reading spare IO on the Cyclone Max using a custom algorithm or other method? Also, is it possible to program the two processors if they are placed in one JTAG chain?




    Comments

  • Dan,

    Thank you for your interest in P&E products. Unfortunately, at this time P&E does not have short term plans to support JTAG Daisy Chaining for MPC5xxx.

    Best Regards,

    Kevin

Add comment


   Want to comment? Please login or create a new PEMicro account.







© 2017 P&E Microcomputer Systems Inc.
Website Terms of Use and Sales Agreement