Cart New Account Login

HomeAbout usProductsSupportForumsBlogCustomer Service

search inside this forum
search inside all forums
Do you support Freescale MC68HC908JB12JDW
Mark L. Jul 30, 2019 at 12:59 PM (12:59 hours)
Staff: Johnny N.

  • Hi I’m building my own bootloader(Max232 chip) 
    and programmer for a MC68HC908JB12JDW.

    Will your software clone this IC? I only need
    to copy and reprogram this IC.

    If so which software package ?


    Thanks

    Mark




    Comments

    • Hi Mark,

      Yes we support the MC68HC908JB12JDW. You will be able to erase, read, and program your microcontroller with the CYCLONE-LC-UNIV. This product comes with all the ribbon cables and software you need.

      http://www.pemicro.com/products/product_viewDetails.cfm?product_id=15320165&productTab=1

      Regards,
      Johnny

      • Hi Jonnny it looks like the cyclone is an in circuit programmer. I have a zif 44 pin socket to a 20 pin tsop clip on adapter that I need to use to program the chip . 

        I just need the software that will work with my programmer .

        Do you have any ?

        Thank you

        Mark

        • Mark,

          Yes the Cyclone is an incircuit programmer only. Do you have a way to bring out the MON08 signals from your adapter board to the Cyclone?

          This is our programming software.
          http://www.pemicro.com/ics08/prog08.cfm

          You might be able to use our software if you have a Motorola ICS board or the MON08 circuitry built into your adapter board. Otherwise you will need the Cyclone and you have to connect all the MON08 signals.

          Regards,
          Johnny

Add comment


   Want to comment? Please login or create a new PEmicro account.







© 2019 P&E Microcomputer Systems Inc.
Website Terms of Use and Sales Agreement