Cart New Account Login

HomeAbout usProductsSupportForumsBlogCustomer Service

search inside this forum
search inside all forums
About the status of downloading the program in cyclone controller
Nitin P. Apr 9, 2018 at 08:02 AM (08:02 hours)
Staff: Johnny N.

  • Hello,

    1)I want to check cyclone universal controller is power on or not.

    2)Also i want to check programming code is downloaded or not in the same controller.

    I want interlock signal from the cyclone universal controller for above mentioned points.

    Is it possible to have both signals from controller?

    If not,please suggest me another way to solve the purpose as mentioned above.

    I am needy of it.

    Thank you,




    Comments

    • Hi Nitin,

      1)I want to check cyclone universal controller is power on or not.

      Are you talking about the power status of the Cyclone Universal or of the target microcontroller?

      If you are talking about the status of the Cyclone, you can ping it. If it is the target micro, there is no status pin but we can display the voltage and current draw that is detected on the target on the screen.

      2) Also i want to check programming code is downloaded or not in the same controller.

      There is no output pin on the Cyclone to get programming status. You can use our dll or console application and get status over USB/Ethernet/Serial.
      See this article on our website for more details:
      http://www.pemicro.com/blog/index.cfm?post_id=142

      Regards,
      Johnny
      PEMicro Support

      • Thank you very much Johnny.

Add comment


   Want to comment? Please login or create a new PEmicro account.







© 2020 P&E Microcomputer Systems Inc.
Website Terms of Use and Sales Agreement