Cart New Account Login

HomeAbout usProductsSupportForumsBlogCustomer Service

search inside this forum
Suggest a new type same as CABLE_CF ColdFire BDM Interface Parallel Port 3.3V
Li A. May 18, 2017 at 02:43 AM (02:43 hours)
Staff: Takao Y.

  • Hello. We want to buy a "CABLE_CF ColdFire BDM Interface Parallel Port 3.3V" product. But it seems discontinued now. Could you suggest a new type same as CABLE_CF ColdFire BDM Interface Parallel Port 3.3V? Thanks.




    Comments

  • Greetings,

    We no longer support parallel port programmers. Is USB-based programmers work for you? If so, then you should look into getting the USB ML Universal hardware:
    http://www.pemicro.com/products/product_viewDetails.cfm?product_id=15320137

    If you need a fast programmer, then you should look into the USB ML Universal FX:
    http://www.pemicro.com/products/product_viewDetails.cfm?product_id=15320143

    What software do you plan on using? Purchasing the hardware does NOT come with any software.


    Takao Yamada

    • Hello. Thanks for you reply. We need the software support programming and 
      on line debugging. If have any highly cost effective software to recommend?

  • Greetings,

    You should look into our PROG software for flash programming and ICD for debugging software:

    PROGCFZ:
    http://www.pemicro.com/products/product_viewDetails.cfm?product_id=99

    ICDCFZ:
    http://www.pemicro.com/products/product_viewDetails.cfm?product_id=98


    Takao Yamada

  • Hello. Thanks. If have any cables can connect to the BDM connector(26pins) when we buy the USB ML Universal hardware. What about the delivery time to China? The price in you website if include the taxes and freight?

  • Greetings,

    Sorry for the delay in response. The cost you see on the website is only for the price of the unit and does not includes taxes or shipping. Delivery is dependent on the type of shipment you select. Most likely to China would be at most a week, but you can pay more for 2 or 3 day shipping.


    Takao Yamada

Add comment


   Want to comment? Please login or create a new PEMicro account.







© 2017 P&E Microcomputer Systems Inc.
Website Terms of Use and Sales Agreement