Cart New Account Login

HomeAbout usProductsSupportForumsBlogCustomer Service

search inside this forum
mpc5742p with trace32 &cyclone-max program to board
jaures h. Dec 17, 2015 at 07:24 AM (07:24 hours)
Staff: Takao Y.

  • i use cyclone-max program to mpc5742p board same function not work.
    but use the trace32 .cmm program to mpc5742p board all function was working.




    Comments

  • Greetings,

    First I would advise to update your cyclone max software and firmware to ensure you have the latest features and bug fixes:
    http://www.pemicro.com/downloads/download_file.cfm?download_id=290

    Also, I would highly advise using the PROG software for PPCNEXUS found within the cyclone max software package. This will help you debug your problem.

    Within prog:
    1) Are you able to load an algorithm?
    2) Which algorithm are you loading?
    3) Which debug shift frequency are you using? Have you tried lowering the frequency?
    4) What commands did you use, and which is causing the problem?


    Once you figure out the problem within PROG, then it should be simple to create a standalone image with the same commands, settings, and configuration to get it working.


    Takao Yamada

Add comment


   Want to comment? Please login or create a new PEMicro account.







© 2017 P&E Microcomputer Systems Inc.
Website Terms of Use and Sales Agreement