Cart New Account Login

HomeAbout usProductsSupportForumsBlogCustomer Service
   Home P&E Customer Support FAQs - Frequently Asked Questions FAQ ID # 67
FAQ ID # 67
 
Question
Once I have configured the Cyclone Max for stand-alone operation, how do I then start the programming sequence from a PC?
 
Answer
You can use the CycloneMax_Launch utility to start the programming sequence.
Examples:

> sap_launch.exe Port=COM1
Used in an instance where the CYCLONE MAX is connected to the PC via the COM1 port.

> sap_launch.exe Port=USB1
Used in an instance where the CYCLONE MAX is connected to the PC via the USB1 port.

> sap_launch.exe Port=209.61.110.251
Used in an instance where the CYCLONE MAX is connected to a network with IP address of 209.61.110.251.

The sap_launch.exe utility then returns a set of DOS error codes which can be used in a .bat file for further processing. More information can be found in the SAP_LAUNCH.doc found in the Cyclone Max software directory.
 
Related Downloads
none
 
Architectures Categories Products
HC08, HCS08, HC(S)12(X), CPU3xx, ColdFire V2/V3/V4, Power MPC5xx/8xx, Qorivva MPC5xxx, ColdFire V1 Stand-Alone Programmer CYCLONEPRO, CYCLONE_MAX
 
Please rate this FAQ to help us improve our support
0 means "not helpful"
10 means "very helpful"
0 1 2 3 4 5 6 7 8 9 10

© 2017 P&E Microcomputer Systems Inc.
Website Terms of Use and Sales Agreement