Cart New Account Login

HomeAbout usProductsSupportForumsBlogCustomer Service
   Home P&E Customer Support FAQs - Frequently Asked Questions FAQ ID # 53
FAQ ID # 53
 
Question
Which ColdFire BDM cable do I need, CABLECF (5 volts) or CABLECF_LV (3.3 volts)?
 
Answer
For Revision F of the ColdFire BDM cable, you may determine whether you need the 3.3 volt or 5 volt CABLECF by measuring the voltage level between Pin 9 and Pin 3 of the target system BDM header. This may not be the case when using an older hardware revision of the ColdFire BDM cable. See our FAQ ID#36.
 
Related Downloads
none
 
Architectures Categories Products
ColdFire V2/V3/V4 Interface Hardware/Cable PKGCFZ, CASMCFZ, ICDCFZ, PROGCFZ, REGCF, UNITCFZ, WINIDECFZ, BDML_CF, BDML_CFLV, CABLE_CF, CABLE_CFLV, PKGCFZ_PRO
 
Please rate this FAQ to help us improve our support
0 means "not helpful"
10 means "very helpful"
0 1 2 3 4 5 6 7 8 9 10

© 2017 P&E Microcomputer Systems Inc.
Website Terms of Use and Sales Agreement