Cart New Account Login

HomeAbout usProductsSupportForumsBlogCustomer Service
   Home P&E Customer Support FAQs - Frequently Asked Questions FAQ ID # 5
FAQ ID # 5
 
Question
Can the Cyclone Pro and Cyclone Max program dynamic data, such as a serial number, in addition to the image which is configured in the unit?
 
Answer
The Cyclone Pro can program Dynamic data, such as a serial number, in addition to the fixed image which has been stored in the Cyclone Pro. The easiest way to accomplish this feature is using the commands "CS: Choose serial file" and "PS: Program Serial" within the image creation utility to program sequential serial numbers. Use the Serialize Utility attached to this FAQ to help create the serial file.

The most recent cyclone pro and cyclone max firmware also allows the user to manage the serial number on the production line. Press the Menu button on the cyclone and select "Modify Next Serial No". The user can increase or decrease the next serial number.

 
Related Downloads
SERIALIZE - Use an Automated Serial Number - Allows the generation of a .SER serial number description file. This graphical utility sets up a serial number which will count according to the bounds set by the user. The .SER file can be called by the PROG flash programmer to program a serial number into the target, or loaded into the cyclone standalone image.

 
Architectures Categories Products
HC08, HCS08, HC(S)12(X), ColdFire V2/V3/V4, Qorivva MPC5xxx, RS08, ColdFire V1, DSC Stand-Alone Programmer CYCLONEPRO
 
Please rate this FAQ to help us improve our support
0 means "not helpful"
10 means "very helpful"
0 1 2 3 4 5 6 7 8 9 10

© 2017 P&E Microcomputer Systems Inc.
Website Terms of Use and Sales Agreement