Cart New Account Login

HomeAbout usProductsSupportForumsBlogCustomer Service
   Home P&E Customer Support FAQs - Frequently Asked Questions FAQ ID # 34
FAQ ID # 34
 
Question
On the ColdFire BDM cable connector, are the PST and DDATA signals used?
 
Answer
The DDATA signals are not used and do not need to be connected to the header, although it is recommended that they are connected for future usage.

The PST processor status signals are required for proper operation of the PEmicro ColdFire BDM cable in both flash programming and debugging.

 
Related Downloads
none
 
Architectures Categories Products
ColdFire V2/V3/V4 Interface Hardware/Cable CYCLONE_MAX, USB-ML-CF, DEMO9S08JM16, DEMOJM, XPC560PADPT144S
 
Please rate this FAQ to help us improve our support
0 means "not helpful"
10 means "very helpful"
0 1 2 3 4 5 6 7 8 9 10

© 2017 P&E Microcomputer Systems Inc.
Website Terms of Use and Sales Agreement