Cart New Account Login

HomeAbout usProductsSupportForumsBlogCustomer Service
   Home P&E Customer Support FAQs - Frequently Asked Questions FAQ ID # 201
FAQ ID # 201
 
Question
I need a list of the error codes for Cyclone stand alone mode.
 
Answer
The standalone error codes are listed in a document in Cyclone software directory called SAP_LAUNCH.DOC, and also in the User Manual. The list below may not be the most current - please see the most recent version of the user manual.

Error codes:

Execution related error codes:
Debug Mode Communication Related Errors
$0001: No target response
$0002: Invalid target response
$0003: Wait for Freeze was cancelled
$0004: Wait for Freeze has failed
$0005: Error detecting communication speed
$0006: Unsecuring the target has failed
$0007: Error entering debug mode
$0008: Error entering debug mode while target is secured
$0009: Error entering debug mode for verification
$000A: Error writing data block to target
$000B: Error in enabling or disabling the module
$000C: Error in performing the timing test
$000D: MON08 target had an invalid reset

SAP Image Handling Related Errors
$0011: SAP image ID is out of boundary range
$0012: Error in SAP image validation
$0013: SAP operation was not found
$0014: SAP image storage was not initialized
$0015: SAP image transfer error, odd length is not allowed
$0016: SAP image transfer error, invalid start address
$0017: SAP image transfer error while writing to storage
$0018: Error writing the serial number structure storage
$0019: Error writing the menu structure storage
$001A: Error within the block erase storage
$001B: Error converting the counter structure
$001C: SAP image version not supported

SAP Communication Handling Errors
$0031: System reset occurred (out of reset for host-controlled operations)

SAP Algorithm header Operation Handling Related Errors
$0061: Undefined algorithm header operation. Check software and firmware version
$0062: Algorithm header operation failure. Check software and firmware version

SAP Operation Related Errors
$0081: SAP operation is not supported, check software and firmware versions
$0082: SAP operation error, target type has a mismatch
$0083: SAP operation cancelled
$0084: SAP running algorithm failure

SAP Blank Check Range and Module Related Errors
$1001: Blank check error, algorithm not supported
$1002: Blank check error, algorithm not found
$1003: Blank check operation failed

SAP Erase Range and Module Related Errors
$2001: Erase error, algorithm not supported
$2002: Erase error, algorithm not found
$2003: Erase error, module failed or cancelled
$2004: Erase error, module failed, target is still secured
$2005: Erase error, module not performed, data is preserved

SAP Program Byte, Word, and Module Related Errors
$3001: Program algorithm is not supported
$3002: Program algorithm was not found
$3003: Program operation failed or was cancelled
$3004: Program operation failed, write protected
$300A: Error during reading data range, invalid data length
$300B: Error during reading data range, invalid start address
$300C: Error during reading data range, no target power
$300D: Error during programming data range, invalid data length
$300E: Error during programming data range, invalid start address
$300F: Error during programming data range, no target power
$3040: (MSD, Kinetis only) Error during programming, would cause device to become permanently secured

SAP Verify Checksum Related Errors
$4001: VC command not supported
$4002: VC failed, invalid algorithm was used
$4003: VC operation failed or was cancelled

$4011: VV command not supported
$4012: VV failed, invalid algorithm was used
$4013: VV operation failed or was cancelled

SAP Verify Range and Module Related Errors
$5003: Verification operation failed or was cancelled

SAP User Function Related Errors
$6003: User function failed or was cancelled

SAP Trim Related Errors
$7001: Trim operation not supported
$7003: Target has no response
$7004: Trim write error, trim value not set
$7007: Trim write error, trim value failed
$7008: Trim read error, trim value failed
$7009: Trim value invalid, value is blank or zero
$700A: Trim value already programmed

Unrecoverable Fatal Errors
$8001: Fatal Error, please contact PEmicro
$8002: Fatal Error, please contact PEmicro
$8003: Fatal Error, please contact PEmicro
$8004: Fatal Error, please contact PEmicro
$8005: Fatal Error, please contact PEmicro
$8006: Fatal Error, please contact PEmicro
$8007: Fatal Error, please contact PEmicro
$8008: Fatal Error, please contact PEmicro
$8009: Fatal Error, please contact PEmicro
$800A: Fatal Error, please contact PEmicro
$800B: Fatal Error, please contact PEmicro
$800C: Fatal Error, please contact PEmicro
$800D: Fatal Error, please contact PEmicro
$800E: Fatal Error, please contact PEmicro
$800F: Fatal Error, please contact PEmicro
$8010: Fatal Error, please contact PEmicro
$8011: Fatal Error, please contact PEmicro
$8012: Fatal Error, please contact PEmicro
$8013: Fatal Error, please contact PEmicro
$8014: Fatal Error, please contact PEmicro
$8015: Fatal Error, please contact PEmicro
$8016: Fatal Error, please contact PEmicro
$8017: Fatal Error, please contact PEmicro
$8018: Fatal Error, please contact PEmicro
$8019: Fatal Error, please contact PEmicro
$8020: Fatal Error, please contact PEmicro
$8021: Fatal Error, please contact PEmicro
$8022: Fatal Error, please contact PEmicro
$8023: Fatal Error, please contact PEmicro

Compact-Flash Related Errors
$A001: Error writing to compact flash
$A002: Error formatting the compact flash
$A003: Compact flash was disconnected during use
$A004: Compact flash has unsupported format
$A005: Compact flash has corrupted data
$A006: Compact flash disk error
$A007: Failed during internal verification
$A008: Failed during external verification
$A009: Error while reading compact flash for image pointer

Serial Number Related Errors
$B001: Error erasing the serial number storage
$B002: Error writing serial number
$B003: Serial number is over the limit, up to 255 can be supported at a time
$B004: Error trying to convert the serial number structure
$B005: Error trying to update the serial number
$B006: Serial number structure not found
$B007: Serial number structure invalid
$B008: Error programming serial number to target

Download Counts Related Errors
$C001: Error erasing the download counts storage
$C002: Error writing the download counts
$C003: Download counts is over the limit, up to 255 can be supported at a time
$C004: Error trying to convert the download counts structure

System Hardware/Firmware/Logic Recoverable Errors
$D001: Firmware does not exist
$D002: Firmware update not allowed
$D003: Firmware update failed
$D004: Firmware update mismatch

 
Related Downloads
Cyclone MAX Single File Installation -
This package installs all the of the software for the Cyclone Max. It includes the PEmicro Cyclone USB Drivers, Image Creation Utility, Image Manager, and all supported flash programming algorithms.

Please uninstall the previous version before installing the latest version.

Cyclone Pro Single File Installation -
This package installs all the of the software for the Cyclone Pro. It includes the PEmicro Cyclone USB Drivers, Image Creation Utility, Image Manager, and all supported flash programming algorithms. This is the same software as what you get on the CD.

Please uninstall the previous version before installing the latest version.

 
Architectures Categories Products
Stand-Alone Programmer XPC560PKIT100S, XPC560SADPT280S, CYCLONEPRO, CYCLONE_MAX, Compsol Software, CYCLONE_RENESAS, XPC560PADPT144S, XPC560PKIT144S
 
Please rate this FAQ to help us improve our support
0 means "not helpful"
10 means "very helpful"
0 1 2 3 4 5 6 7 8 9 10

© 2017 P&E Microcomputer Systems Inc.
Website Terms of Use and Sales Agreement