Cart New Account Login

HomeAbout usProductsSupportForumsBlogCustomer Service
   Home P&E Customer Support FAQs - Frequently Asked Questions Matching FAQs
Frequently Asked Questions
Find more FAQs
User
Rank
FAQ ID / Question
10.00 ID 90 Your USB ColdFire Multilink uses PST[3:0] signals, but all my processor has is the PST_ALL signal. How do I use the Multilink or Cyclone Max with this configuration?
10.00 ID 227 How do I switch between Lock-Step Mode (LSM) and Dual-Processor Mode (DPM) on a MPC564xL PowerPC Nexus devices?
10.00 ID 230 Why do I see the Power Dialog warning when trying to debug or flash program my chip in PROG, ICD, UNIT, or 3rd party software like Codewarrior? How can I prevent this from happening?
10.00 ID 231 How do I configure Advanced Features and Multi-core support using P&E GDB Server Eclipse Plugin?
10.00 ID 40 I am using an HC12 device in expanded mode, are there some special considerations for this?
9.99 ID 211 My classic Codewarrior or other 3rd party software with PEmicro support will not detect my PEmicro hardware tool or fails to connect to my target. What can I do to fix this?
9.98 ID 52 I am getting an EPrivilege Exception when running PEmicro software. What is the problem?
9.98 ID 218 How do I partition my FlexNVM on the Kinetis to have Data flash and EEPROM backup flash memory? (e.g. K10DX128, K20DX256, K60FX512)
9.95 ID 83 I recently purchased a USB-ML-12 Rev. B, but it does not work with my debugger/programmer. The USB-ML-12 module is not detected by software. I also have a USB-ML-12 Rev. A, which works fine. What shall I do?
9.94 ID 88 How do I update the Firmware on my Cyclone?
9.89 ID 78 My USB Multilink stopped working. It was working just fine last time I used it, however now the software says the port is "undetected"! The Blue and orange LED are on... help!
9.82 ID 89 I try to install your software, but installation fails with this message:

There are currently 2 open applications using WinDriver. Please close all applications and press Retry. To reload WinDriver, press Cancel and reboot.

How do I solve this?

9.76 ID 29 The connection assistant dialog indicates that my USB Multilink or Cyclone is undetected even though I have connected the hardware to my USB port. What should I do?
9.74 ID 61 When I load the ICD debugger or PROG programmer, Norton Internet Security tells me it is attempting to access the internet, Why?
9.60 ID 94 I have secured my MCF5213 ColdFire device and can no longer access it. How can I unsecure it?
9.56 ID 1 I was working with my HCS12(X) target processor and suddenly I can no longer communicate with it. Any ideas?
9.50 ID 204 How do I get Virtual Serial port to work using TWR-S12G128 OSBDM board under Codewarrior CW5.1 for S12(X) IDE?
9.26 ID 4 I am having trouble communicating with a PEmicro parallel port debug interface cable. What should I try?
4.00 ID 229 I cannot see PEmicro hardware interfaces under Windows 10 Anniversary addition, how do I update to latest PEmicro drivers?
3.71 ID 190 How do I activate my PEmicro software?
2.12 ID 80 I am using a C compiler and the PEmicro debugger. What type of debug file format will the PEmicro debugger accept?
2.00 ID 62 The ICD08SZ HC08 debugger only gives me one or two breakpoints to work with. I need more! Is there any workaround to this hardware limitation?
1.57 ID 210 Does your software require administrative rights?
1.32 ID 87 What processors does PKGPPCNEXUS support?
1.31 ID 200 I am unable to install software on my PC which is running Windows 7 and/or 64 bit OS.
1.26 ID 39 Is there an example for creating a paged assembly program on the HC12/HCS12 family processors?
1.14 ID 125 Do I need to wire the PST signals to the debug connector on my ColdFire V2/3/4 target if I want to determine if the device is running or halted?
0.93 ID 48 Is it possible to stop a running HC08 target? Whenever I issue a "stop" command to my running target, I seem to lose communication and I get the "Ping, Reset, Abort" dialog!
0.69 ID 76 Can I debug with optimized code using the PEmicro In-Circuit Debugger and the GNU C compiler? When using the debugger, my variables seem to be displaying the incorrect values.
0.68 ID 69 When using the debugger for high-level, C language debugging, the debugger is not displaying the correct value for variables. What is the cause?
0.67 ID 99 When I try to load the register editor in ICDxxZ with the R command, I get "No register (.REG) files were found". I already installed REGKIT .
0.66 ID 91 How do I use the ICD software to debug my C source code using the ELF/DWARF debug file format?
0.63 ID 37 Why do I get a bus error when I single step through a MOVEM.L command as soon as the register count goes above 7? Any solution?
0.40 ID 195 My device is part of the CPU32/683xx family and I'm debugging my code in ICD32Z. If I try to set a breakpoint in my code (located in FLASH EEPROM), I get the following error message on my screen: “Could not write breakpoint to hardware.”.
0.38 ID 49 My interrupts don't seem to be working and I'm using an HC(S)12 with paged FLASH. How can I get them to function properly?
0.30 ID 205 My PROG and ICD are not working on my new computer. How much does it cost to upgrade my software?
0.02 ID 46 How do I set the option register using AEVM11, within 64 cpu cycles of reset?
0.00 ID 124 Is there a utility available that will allow me to view the contents of an ELF/DWARF file?
0.00 ID 216 Why does my debugger (ICDCFZ or ICD32Z) lose communication with the processor when I write to the system registers to initialize memory?
0.00 ID 228 I own PEmicro algorithms, software, or plugin. Where and how do I get the latest version?
0.00 ID 222 I am having sporadic failures trying to debug my Kinetis microprocessor with a USB-ML-Universal hardware interface due to some ringing on CLK line. What can be done to address this issue?

© 2017 P&E Microcomputer Systems Inc.
Website Terms of Use and Sales Agreement