Cart New Account Login

HomeAbout usProductsSupportForumsBlogCustomer Service
   Home P&E Customer Support FAQs - Frequently Asked Questions Matching FAQs
Frequently Asked Questions
Find more FAQs
User
Rank
FAQ ID / Question
10.00 ID 227 How do I switch between Lock-Step Mode (LSM) and Dual-Processor Mode (DPM) on a MPC564xL PowerPC Nexus devices?
10.00 ID 230 Why do I see the Power Dialog warning when trying to debug or flash program my chip in PROG, ICD, UNIT, or 3rd party software like Codewarrior? How can I prevent this from happening?
9.97 ID 79 My USB Multilink is not detected by NXP Codewarrior. What should I do?
9.97 ID 42 I am attempting to program external flash connected to my embedded processor. Either the erase, program, or show module does not work. What is the most likely sources of problems?
9.82 ID 89 I try to install your software, but installation fails with this message:

There are currently 2 open applications using WinDriver. Please close all applications and press Retry. To reload WinDriver, press Cancel and reboot.

How do I solve this?

9.60 ID 94 I have secured my MCF5213 ColdFire device and can no longer access it. How can I unsecure it?
9.50 ID 204 How do I get Virtual Serial port to work using TWR-S12G128 OSBDM board under Codewarrior CW5.1 for S12(X) IDE?
0.38 ID 49 My interrupts don't seem to be working and I'm using an HC(S)12 with paged FLASH. How can I get them to function properly?

© 2017 P&E Microcomputer Systems Inc.
Website Terms of Use and Sales Agreement