Cart New Account Login

HomeAbout usProductsSupportForumsBlogCustomer Service
   Home P&E Customer Support FAQs - Frequently Asked Questions Matching FAQs
Frequently Asked Questions
Find more FAQs
User
Rank
FAQ ID / Question
10.00 ID 90 Your USB ColdFire Multilink uses PST[3:0] signals, but all my processor has is the PST_ALL signal. How do I use the Multilink or Cyclone Max with this configuration?
10.00 ID 226 Why am I getting Error $001B when I try to do stand alone programming with my Cyclone?
10.00 ID 34 On the ColdFire BDM cable connector, are the PST and DDATA signals used?
9.99 ID 211 My classic Codewarrior or other 3rd party software with PEmicro support will not detect my PEmicro hardware tool or fails to connect to my target. What can I do to fix this?
9.99 ID 110 How do I store multiple images onto my Cyclone?
9.99 ID 75 I get a Blue Screen crash when Windows attempts to install the drivers for my USB Hardware Interface when I plug it in. What can I do?
9.98 ID 121 When using a programming algorithm to program an external flash device, is there a simple way to test the processor's chip select configuration to make sure it's configured properly?
9.98 ID 52 I am getting an EPrivilege Exception when running PEmicro software. What is the problem?
9.97 ID 42 I am attempting to program external flash connected to my embedded processor. Either the erase, program, or show module does not work. What is the most likely sources of problems?
9.94 ID 196 How do I use OSBDM/OSJTAG interface under Codewarrior 10.1 and higher?
9.94 ID 88 How do I update the Firmware on my Cyclone?
9.82 ID 89 I try to install your software, but installation fails with this message:

There are currently 2 open applications using WinDriver. Please close all applications and press Retry. To reload WinDriver, press Cancel and reboot.

How do I solve this?

9.82 ID 119 How do I extend the ribbon cable that connects PEmicro's hardware to my target?
9.77 ID 29 The connection assistant dialog indicates that my USB Multilink or Cyclone is undetected even though I have connected the hardware to my USB port. What should I do?
9.77 ID 67 Once I have configured the Cyclone Max for stand-alone operation, how do I then start the programming sequence from a PC?
9.74 ID 61 When I load the ICD debugger or PROG programmer, Norton Internet Security tells me it is attempting to access the internet, Why?
9.74 ID 63 When I run the command-line programmer which its path has a space in it, or run the programmer with a configuration file whose file name has a space in it, I get an error:

Error - Invalid command line parameter. ERROR 43 during script!

How do I fix this problem?

9.68 ID 74 I would like to preserve some data in my flash or eeprom. However, when I erase the module I lose this data. What can I do?
9.63 ID 206 How do I transfer my existing software to another PC?
9.60 ID 94 I have secured my MCF5213 ColdFire device and can no longer access it. How can I unsecure it?
9.50 ID 68 Why are the Cyclones preconfigured with names, and what is the basis for the names?
9.37 ID 203 I'm getting errors installing your latest Drivers on Windows XP 64 bit. I am seeing driver installation errors while installing Codewarrior 10.3 on Windows XP 64 bit.
9.26 ID 4 I am having trouble communicating with a PEmicro parallel port debug interface cable. What should I try?
5.73 ID 5 Can the Cyclone Pro and Cyclone Max program dynamic data, such as a serial number, in addition to the image which is configured in the unit?
4.59 ID 33 Are there any guidelines for using PEmicro's BDM Cables?
4.00 ID 229 I cannot see PEmicro hardware interfaces under Windows 10 Anniversary addition, how do I update to latest PEmicro drivers?
3.71 ID 190 How do I activate my PEmicro software?
2.80 ID 64 For CABLECF and CABLECF_LV, at what voltage should my PC parallel port be operating?
2.54 ID 53 Which ColdFire BDM cable do I need, CABLECF (5 volts) or CABLECF_LV (3.3 volts)?
2.12 ID 80 I am using a C compiler and the PEmicro debugger. What type of debug file format will the PEmicro debugger accept?
1.50 ID 30 I launched the command-line CPROGxx flash programmer, saw a window flicker up, and then disappear. How do I know what happened?
1.31 ID 200 I am unable to install software on my PC which is running Windows 7 and/or 64 bit OS.
1.14 ID 125 Do I need to wire the PST signals to the debug connector on my ColdFire V2/3/4 target if I want to determine if the device is running or halted?
1.06 ID 45 I recently upgraded my assembler to the latest version. Now my S19 files are different. Why?
1.03 ID 41 How can I use CPROG to program dynamic data, such as a serial number, into my product where the number changes for each device I am programming?
1.03 ID 36 What are the differences between a Rev. D/E Coldfire interface cable and a Rev. F Coldfire interface cable?
0.69 ID 76 Can I debug with optimized code using the PEmicro In-Circuit Debugger and the GNU C compiler? When using the debugger, my variables seem to be displaying the incorrect values.
0.66 ID 91 How do I use the ICD software to debug my C source code using the ELF/DWARF debug file format?
0.38 ID 82 With PKGCFZ_PRO or PKGPPCNEXUS, I created a new project from a template using WinIDE. How do I add my source files to the target application?
0.19 ID 118 How do I configure WinIDE to launch Readelf?
0.08 ID 81 Using PKGCFZ_PRO or PKGPPCNEXUS, where do I configure the GNU compiler settings?
0.03 ID 86 How do I migrate my existing source code to PKGCFZ_PRO or PKGPPCNEXUS?
0.03 ID 60 Where can I get more information about using the GNU compiler?
0.01 ID 193 My CableCF or CableCFLV parallel port ColdFire programmer isn't working. What should I do?
0.00 ID 124 Is there a utility available that will allow me to view the contents of an ELF/DWARF file?
0.00 ID 216 Why does my debugger (ICDCFZ or ICD32Z) lose communication with the processor when I write to the system registers to initialize memory?
0.00 ID 228 I own PEmicro algorithms, software, or plugin. Where and how do I get the latest version?

© 2017 P&E Microcomputer Systems Inc.
Website Terms of Use and Sales Agreement