Cart New Account Login

HomeAbout usProductsSupportForumsBlogCustomer Service
   Home P&E Customer Support FAQs - Frequently Asked Questions Matching FAQs
Frequently Asked Questions
Find more FAQs
FAQ ID / Question
10.00 ID 230 Why do I see the Power Dialog warning when trying to debug or flash program my chip in PROG, ICD, UNIT, or 3rd party software like Codewarrior? How can I prevent this from happening?
9.99 ID 110 How do I store multiple images onto my Cyclone?
9.99 ID 75 I get a Blue Screen crash when Windows attempts to install the drivers for my USB Hardware Interface when I plug it in. What can I do?
9.98 ID 121 When using a programming algorithm to program an external flash device, is there a simple way to test the processor's chip select configuration to make sure it's configured properly?
9.98 ID 52 I am getting an EPrivilege Exception when running PEmicro software. What is the problem?
9.97 ID 42 I am attempting to program external flash connected to my embedded processor. Either the erase, program, or show module does not work. What is the most likely sources of problems?
9.83 ID 89 I try to install your software, but installation fails with this message:

There are currently 2 open applications using WinDriver. Please close all applications and press Retry. To reload WinDriver, press Cancel and reboot.

How do I solve this?

9.82 ID 119 How do I extend the ribbon cable that connects PEmicro's hardware to my target?
9.77 ID 29 The connection assistant dialog indicates that my USB Multilink or Cyclone is undetected even though I have connected the hardware to my USB port. What should I do?
9.77 ID 67 Once I have configured the Cyclone Max for stand-alone operation, how do I then start the programming sequence from a PC?
9.74 ID 61 When I load the ICD debugger or PROG programmer, Norton Internet Security tells me it is attempting to access the internet, Why?
9.68 ID 74 I would like to preserve some data in my flash or eeprom. However, when I erase the module I lose this data. What can I do?
9.63 ID 206 How do I transfer my existing software to another PC?
9.37 ID 203 I'm getting errors installing your latest Drivers on Windows XP 64 bit. I am seeing driver installation errors while installing Codewarrior 10.3 on Windows XP 64 bit.
9.26 ID 4 I am having trouble communicating with a PEmicro parallel port debug interface cable. What should I try?
4.59 ID 33 Are there any guidelines for using PEmicro's BDM Cables?
3.71 ID 190 How do I activate my PEmicro software?
2.12 ID 80 I am using a C compiler and the PEmicro debugger. What type of debug file format will the PEmicro debugger accept?
1.69 ID 35 What is the J2 connector for on the ICD Cable (CPU16/CPU32)?
1.50 ID 30 I launched the command-line CPROGxx flash programmer, saw a window flicker up, and then disappear. How do I know what happened?
1.31 ID 200 I am unable to install software on my PC which is running Windows 7 and/or 64 bit OS.
1.06 ID 45 I recently upgraded my assembler to the latest version. Now my S19 files are different. Why?
1.03 ID 41 How can I use CPROG to program dynamic data, such as a serial number, into my product where the number changes for each device I am programming?
0.69 ID 76 Can I debug with optimized code using the PEmicro In-Circuit Debugger and the GNU C compiler? When using the debugger, my variables seem to be displaying the incorrect values.
0.66 ID 91 How do I use the ICD software to debug my C source code using the ELF/DWARF debug file format?
0.63 ID 37 Why do I get a bus error when I single step through a MOVEM.L command as soon as the register count goes above 7? Any solution?
0.40 ID 195 My device is part of the CPU32/683xx family and I'm debugging my code in ICD32Z. If I try to set a breakpoint in my code (located in FLASH EEPROM), I get the following error message on my screen: “Could not write breakpoint to hardware.”.
0.23 ID 113 I cannot connect to my target with the USB-ML-1632 USB interface while using PROG32Z or ICD32Z. I can connect just fine if I am using the Cable16/32 parallel port interface.
0.08 ID 47 I am using the UNIT_32Z library. Can you tell me the difference between using the "put_debugger_fc_value" routine and the "put_dfc_value" and "put_sfc_value" routines?
0.00 ID 216 Why does my debugger (ICDCFZ or ICD32Z) lose communication with the processor when I write to the system registers to initialize memory?
0.00 ID 228 I own PEmicro algorithms, software, or plugin. Where and how do I get the latest version?

© 2017 P&E Microcomputer Systems Inc.
Website Terms of Use and Sales Agreement