Cart New Account Login

HomeAbout usProductsSupportForumsBlogCustomer Service
   Home P&E Customer Support FAQs - Frequently Asked Questions Matching FAQs
Frequently Asked Questions
Find more FAQs
User
Rank
FAQ ID / Question
10.00 ID 226 Why am I getting Error $001B when I try to do stand alone programming with my Cyclone?
10.00 ID 230 Why do I see the Power Dialog warning when trying to debug or flash program my chip in PROG, ICD, UNIT, or 3rd party software like Codewarrior? How can I prevent this from happening?
10.00 ID 217 Why am I getting Error $7009 when I try to do stand alone programming with my Cyclone?
9.99 ID 211 My classic Codewarrior or other 3rd party software with PEmicro support will not detect my PEmicro hardware tool or fails to connect to my target. What can I do to fix this?
9.99 ID 110 How do I store multiple images onto my Cyclone?
9.99 ID 75 I get a Blue Screen crash when Windows attempts to install the drivers for my USB Hardware Interface when I plug it in. What can I do?
9.98 ID 121 When using a programming algorithm to program an external flash device, is there a simple way to test the processor's chip select configuration to make sure it's configured properly?
9.98 ID 123 How can I program a pre-calculated trim value into my HCS08/RS08/CFV1 device to be loaded at run time?
9.98 ID 52 I am getting an EPrivilege Exception when running PEmicro software. What is the problem?
9.97 ID 79 My USB Multilink is not detected by NXP Codewarrior. What should I do?
9.95 ID 83 I recently purchased a USB-ML-12 Rev. B, but it does not work with my debugger/programmer. The USB-ML-12 module is not detected by software. I also have a USB-ML-12 Rev. A, which works fine. What shall I do?
9.94 ID 196 How do I use OSBDM/OSJTAG interface under Codewarrior 10.1 and higher?
9.89 ID 78 My USB Multilink stopped working. It was working just fine last time I used it, however now the software says the port is "undetected"! The Blue and orange LED are on... help!
9.88 ID 199 Do you have any guidelines or troubleshooting tips for programming HCS08/CFV1/RS08 targets with the Cyclone Pro in stand alone mode?
9.83 ID 89 I try to install your software, but installation fails with this message:

There are currently 2 open applications using WinDriver. Please close all applications and press Retry. To reload WinDriver, press Cancel and reboot.

How do I solve this?

9.82 ID 119 How do I extend the ribbon cable that connects PEmicro's hardware to my target?
9.77 ID 29 The connection assistant dialog indicates that my USB Multilink or Cyclone is undetected even though I have connected the hardware to my USB port. What should I do?
9.77 ID 67 Once I have configured the Cyclone Max for stand-alone operation, how do I then start the programming sequence from a PC?
9.74 ID 61 When I load the ICD debugger or PROG programmer, Norton Internet Security tells me it is attempting to access the internet, Why?
9.74 ID 63 When I run the command-line programmer which its path has a space in it, or run the programmer with a configuration file whose file name has a space in it, I get an error:

Error - Invalid command line parameter. ERROR 43 during script!

How do I fix this problem?

9.68 ID 74 I would like to preserve some data in my flash or eeprom. However, when I erase the module I lose this data. What can I do?
9.63 ID 206 How do I transfer my existing software to another PC?
9.37 ID 203 I'm getting errors installing your latest Drivers on Windows XP 64 bit. I am seeing driver installation errors while installing Codewarrior 10.3 on Windows XP 64 bit.
9.26 ID 4 I am having trouble communicating with a PEmicro parallel port debug interface cable. What should I try?
7.93 ID 202 I am unable to unsecure HCS08QD2 or HCS08QD4 devices with a Cyclone Pro in standalone mode. The Cyclone Pro gives the following error: "Error $00000008" and the Security LED blinks.
5.73 ID 5 Can the Cyclone Pro and Cyclone Max program dynamic data, such as a serial number, in addition to the image which is configured in the unit?
4.59 ID 33 Are there any guidelines for using PEmicro's BDM Cables?
4.00 ID 229 I cannot see PEmicro hardware interfaces under Windows 10 Anniversary addition, how do I update to latest PEmicro drivers?
3.71 ID 190 How do I activate my PEmicro software?
3.00 ID 7 How much current does the USB-ML-12 draw from the target?
2.12 ID 80 I am using a C compiler and the PEmicro debugger. What type of debug file format will the PEmicro debugger accept?
2.09 ID 6 How much current does the BDM multilink draw from the target?
1.50 ID 30 I launched the command-line CPROGxx flash programmer, saw a window flicker up, and then disappear. How do I know what happened?
1.06 ID 45 I recently upgraded my assembler to the latest version. Now my S19 files are different. Why?
1.03 ID 41 How can I use CPROG to program dynamic data, such as a serial number, into my product where the number changes for each device I am programming?
0.66 ID 91 How do I use the ICD software to debug my C source code using the ELF/DWARF debug file format?
0.31 ID 58 I am trying to debug a MC9S08 target without success. When I plug the BDM Multilink into the target, the voltage drops from 3.0V to 0.7V. I have made sure I am plugging the 6-pin ribbon in properly. What is going on?
0.28 ID 191 I am unable to enumerate my USB-ML-MON08 RevB or USB-ML-12 RevA under the 32 bit versions of Windows Vista/7 or the 64 bit versions of Windows XP/Vista/7.
0.27 ID 194 How do I resolve a programming error under Codewarrior 6.3 when a selected trim frequency yields a trim value of 0x80 0x00 or 0x7F 0x01?
0.17 ID 43 Does PEmicro's CASM assembler optimize the code generation for variables defined in the first page?
0.00 ID 228 I own PEmicro algorithms, software, or plugin. Where and how do I get the latest version?

© 2017 P&E Microcomputer Systems Inc.
Website Terms of Use and Sales Agreement